The Video and Embedded Evaluation Kit - Multi-touch, Second Edition (VEEK-MT2) is a comprehensive design environment with everything embedded developers need to create processing-based systems. VEEK-MT2 delivers an integrated platform that includes hardware, design tools, intellectual property (IP) and reference designs for developing embedded software and hardware platform in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2 features the DE2-115 development board targeting the Cyclone IV E FPGA, as well as a capacitive LCD multimedia color touch panel which natively supports 5 point touch and multi-touch gestures. A 8-megapixel digital image sensor, ambient light sensor, Gyroscope, Magnetometer, and 3-axis accelerometer make up the rich feature-set.

• DE2-115 Development Board
• Cyclone IV EP4CE115 FPGA
• 114,480 logic elements (LEs)
• 432 M9K memory blocks
• 3,888 Embedded memory (Kbits)
• 266 Embedded 18 x 18 multipliers
• 4 General-purpose PLLs
• 528 User I/Os
• Configuration
• EPCS64 serial configuration device
• On-board USB-Blaster circuitry
• JTAG and AS mode configuration supported
• Memory Devices
• 128MB SDRAM
• 2MB SRAM
• 8MB FLASH with 8-bit mode
• 32Kbit EEPROM
• Switches and Indicators
• 18 switches and 4 Push-buttons
• 18 red and 9 green LEDs
• Eight 7-segment displays
• Audio
• 24-bit encoder/decoder (CODEC)
• Line-in, line-out, and 3.5mm jacks
• Character Display
• 16x2 LCD module
• On-board Clocking Circuitry
• Three 50MHz oscillator clock inputs
• SMA connectors (external clock input/output)
• SD Card Socket
• Provides SPI and 4-bit SD mode for SD card access
• Two Gigabit Ethernet Ports
• Integrated 10/100/1000 Ethernet
• 172-pin High Speed Mezzanine Card (HSMC)
• Extension for LCD and camera module
• Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)
• USB Type A and B
• Provides host and device controller compliant with USB 2.0
• Support for data transfer at full-speed and low-speed
• PC driver available
• 40-pin Expansion Port
• Configurable I/O standards (voltage levels: 3.3/2.5/1.8/1.5V)
• VGA-out Connector
• VGA DAC (high speed triple DACs)
• DB-9 Serial Connector
• RS-232 port with flow control
• PS/2 Connector
• PS/2 connector for connecting a PS/2 mouse or keyboard
• Remote Control
• Infrared receiver module
• TV-in Connector
• TV decoder (NTSC/PAL/SECAM)
• Power
• 12V DC input
• Switching and step-down regulators LM3150MH
• Capacitive LCD Multi-touch Screen
• 7-inch TFT LCD with pixel resolution of 800*480
• 16 million colors (24-bit RGB)
• LED backlight
• 5 point Capacitive Touch
• 8-Megapixel Digital Image Sensor
• 3,264H x 2,448V active pixels with Bayer color arrangement
• Sensitivity 940mV/Lux-sec
• Voice Coil Motor for focus control
• Ambient Light Sensor
• Precise illumination measurement under diverse lighting conditions
• Programmable interrupts
• 16-bit digital output with I2C fast-mode at 400 kHz
• Programmable analog gain and Integration time
• 50/60Hz lighting ripple rejection
• MPU9250 Nine-Axis Sensors
• Accelerometer Features
• Digital-output triple-axis accelerometer
• Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
• Self-test
• Gyroscope Features
• Digital-output X-, Y-, and Z-Axis angular rate sensors
• User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
• Self-test
• Magnetometer
• 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
• Wide dynamic measurement range and high resolution with lower current consumption.
• Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
• Full scale measurement range is ±4800μT
• Magnetometer normal operating current: 280μA at 8Hz repetition rate
• Self-test function with internal magnetic source to confirm magnetic sensor operation on end products