Product information ""ZynqBerry" SoC Module with AMD Zynq™ 7010-1C, Raspberry Pi 3 compatible"

The predecessor of this article is TE0726-03-41C64-A. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0726-04-41C94-A is a Raspberry Pi 3 compatible SoC module integrating a AMD/Xilinx Zynq™ 7010 SoC, 512 MByte ECC DDR3L SDRAM, four USB ports, an Ethernet port and 16 MByte Flash memory for configuration und operation. A microSD connector provides additional data storage.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Notice

Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Key Features

• SoC / FPGA
  • Device: AMD/Xilinx Zynq™ XC7Z010-1CLG225C
  • Speedgrade: -1
  • Temperature range: Commercial
  • Package: CLG225

• RAM / Storage
  • 512 MByte ECC DDR3L SDRAM
  • 16 MByte Flash

• Interface
  • LAN9514 USB Hub with Ethernet 
    • 4 x USB with power switches
    • 100 Mbit Ethernet RJ45
  • Micro SD card slot
  • HAT header with 26 I/O's
  • HDMI type A
  • DSI connector (HDMI)
  • CSI-2 connector (camera)
  • Micro USB
    • Power input
    • USB UART
    • JTAG ARM and FPGA debug
  • 3.5 mm audio plug (PWM Audio output only)

• Power
  • via micro USB
  • alternative via 5V pin header

• Dimension
  • Raspberry Pi Model 3 form factor
  • 6.35 x 9.3 cm
    
    

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado ML Standard Edition (free version)

The Vivado ML Standard Edition is the FREE version of the Vivado design suite. Vivado ML Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview of all editions of Vivado ML

Scope of Delivery

• 1 x TE0726-04-41C94-A Trenz Electronic "ZynqBerry" module with AMD/Xilinx Zynq™ 7010

Additional Information

• Manufacturer's article number: TE0726-04-41C94-A
• Trenz Electronic TE0726 Wiki
• Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.

Related links to ""ZynqBerry" SoC Module with AMD Zynq™ 7010-1C, Raspberry Pi 3 compatible"

•  Do you have any questions concerning this product?
•  Wiki
•  Further products by Trenz Electronic GmbH