MYS-7Z020-V2-0E1D-766-C-S

HOME >

MYIR

Xilinx

MYS-7Z020-V2-0E1D-766-C-S

짧은설명: Z-turn Board (Xilinx Zynq-7020)

판매가: 212,300원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 44,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000617678

제조사: MYIR Tech

MYS-7Z020-V2-0E1D-766-C-S

0원

총 상품금액

총 할인금액

총 합계금액

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (1)

상품상세정보

- 667MHz Xilinx XC7Z010/020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit), 16MB QSPI Flash
- USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, …
- Onboard Three-axis Acceleration Sensor and Temperature Sensor
- Ready-to-Run Linux Single Board Computer
- Optional Camera and WiFi Modules, IO Extension Cape

Overview

The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.

The Z-turn Board takes full features of the Zynq-7010 / 7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.

The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 3.15.0 SDK, the kernel and many drivers are in source code. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 4GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.

The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.

Features

Item	Features
SoC	Xilinx XC7Z010-1CLG400C (Zynq-7010) or XC7Z020-1CLG400C (Zynq-7020) - 667MHz ARM? dual-core Cortex™-A9 MPCore processor (up to 866MHz) - Integrated Artix-7 class FPGA subsystem with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010) with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020) - NEON™ & Single / Double Precision Floating Point for each processor - Supports a Variety of Static and Dynamic Memory Interfaces
Memory	1GB DDR3 SDRAM (2 x 512MB, 32-bit)
Storage	16MB QSPI Flash TF card interface
Communications	1 x 10/100/1000M Ethernet 1 x CAN 1 x Mini USB2.0 OTG 1 x USB-UART debug interface
Display	1 x HDMI (supports 1080p resolution) We are using evaluation version of Xylon's logiCVC-ML and logiCLK IP core. Please contact Xylon to buy the license of the IP core for logiCVC-ML or logiCLK. http://www.logicbricks.com/Products/logiCVC-ML.aspx http://www.logicbricks.com/Products/logiCLK.aspx
User I/O	Brought out via two 1.27mm pitch 80-pin SMT female connectors - 90/106 user I/O (7010/7020) - Configurable as up to 39 LVDS pairs I/O
Dimensions	63mm x 102mm x 1.6mm (8-layer PCB design)
Power supply	USB power supply or DC 5V/2A
Others	Onboard three-axis acceleration sensor and temperature sensor 1 x 2.54mm pitch 14-pin JTAG interface 2 x Buttons (1x Reset, 1 x User) 4-channel toggle switch 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED) 1 x Buzzer
OS support	Linux 3.15.0
Target Applications	Evaluation and Prototyping for Zynq-7000 AP SoC Industrial Automation Test & measurement Medical Equipment Intelligent Video Surveillance Aerospace and military

Z-turn Board in the Video

http://youtu.be/1fziE-x2TC0

Z-turn IO Cape

Z-turn IO Cape (an IO extension board for Z-turn Board) Z-turn Board Mounted on Z-turn IO Cape

Hardware Features

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.

The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix?-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex?-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.

	Z-7010	Z-7015	Z-7020	Z-7030	Z-7035	Z-7045	Z-7100
Processor Core	Dual ARM? Cortex™-A9 MPCore™ with CoreSight™
Processor Extensions	NEON™ & Single / Double Precision Floating Point for each processor
L1 Cache	32 KB Instruction, 32 KB Data per processor
L2 Cache	512 KB
On-Chip Memory	256 KB
Memory Interfaces	DDR3, DDR3L, DDR2, LPDDR2, 2x Quad-SPI, NAND, NOR
Peripherals	2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO
Logic Cells	28K Logic Cells	74K Logic Cells	85K Logic Cells	125K Logic Cells	275K Logic Cells	350K Logic Cells	444K Logic Cells
BlockRAM (Mb)	240 KB	380 KB	560 KB	1,060 KB	2,000 KB	2,180 KB	3,020 KB
DSP Slices	80	160	220	400	900	900	2,020
Transceiver Count		4 (6.25 Gb/s)		up to 4 (12.5 Gb/s)	up to 16 (12.5 Gb/s)	up to 16 (12.5 Gb/s)	up to 16 (10.3125 Gb/s)

Zynq-7000 Devices

Z-turn Board Function Block Diagram

Z-turn Board Dimension Chart

Software Features

Item	Features	Description
Cross compiler	gcc 4.6.1	gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50)
Boot program	BOOT.BIN	First boot program including FSBL, bitstream and u-boot
Linux Kernel	Linux 3.15.0	Customized kernel for MYS-XC7Z010/020
Drivers	USB OTG	USB OTG driver
	Ethernet	Gigabit Ethernet driver
	MMC/SD/TF	MMC/SD/TF card driver
	CAN	CAN driver
	LCD Controller	XYLON LCD driver
	HDMI	HDMI driver
	Button	Button driver
	UART	UART driver
	LED	LED driver
	GPIO	GPIO driver
	Buzzer	Buzzer driver
	G-Sensor	Three-axis acceleration sensor driver
	Tempreture Sensor	Temperature sensor driver
File System	Ramdisk	Ramdisk system image
File System	Ubuntu Desktop 12.04	Tar file

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1	Xilinx Zynq-7000 Overview	658 KB
2	Z-turn Board Overview	1.46 MB
3	Z-turn Board Dimensions	150 KB
4	Z-turn Board track length for I/O	62 KB
5	Z-turn Board Schematic	634 KB

Z-turn Board Top-view

Z-turn Board Bottom-view

Order Informatin

Item	Part No.	Packing List
Z-turn Board	MYS-7Z010-C-S	- One Z-turn Board (with XC7Z010-1CLG400C SoC) - One 4GB TF card - One product disk
Z-turn Board	MYS-7Z020-C-S	- One Z-turn Board (with XC7Z020-1CLG400C SoC) - One 4GB TF card - One product disk
Z-turn Kit	MYS-7Z010-C	- One Z-turn Board (MYS-7Z010-C-S or MYS-7Z020-C-S) - One 1.5m cross Ethernet cable - One 1.5m Mini USB2.0 cable - One Mini USB OTG Data cable - One HDMI cable - One 4GB TF card - One 5V/2A Power adapter - One product disk (including user manual, schematic in PDF format, datasheets and software package)
Z-turn Kit	MYS-7Z020-C