Product information "TE0808-04-9BE21-AS Starter Kit"
The Trenz Electronic Starter Kit TE0808-04-9BE21-AS consists of a TE0808-04-9BE21-A module with ZU9 on a TEBF0808-04 base board including a pre-assembled heatsink, in a black Core V1 Mini-ITX Enclosure. Supplied with a Be Quiet! 400W power supply for the enclosure, two mounted XMOD FTDI JTAG Adapter, an 8 GB micro SD card, an USB cable, screws and bolts.
The Module: TE0808-04-9BE21-A
The Trenz Electronic TE0808-04-9BE21-A is a MPSoC module integrating a Xilinx Zynq UltraScale+, 4 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, 20 high speed serial transceivers, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.
Key Features
- Xilinx Zynq UltraScale+ XCZU9EG-1FFVC900E
- ZU9EG 900 Pin Packages
- 3 mm mounting holes for skyline heat spreader
- Size: 52 x 76 mm
- B2B Connectors: 4 x 160 pin
- Rugged for shock and high vibration
- 4 GByte 64-Bit DDR4 SDRAM
- 128 MByte SPI Boot Flash (dual parallel)
- User I/Os
- 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks)
- Serial transceivers: 4 x GTR + 16 x GTH
- Transceiver clocks inputs and outputs
- PLL clock generator inputs and outputs
- Si5345 - 10 output PLL
- All power supplies on board, single 3.3V Power required
- 14 on-board DC/DC regulators and 13 LDOs
- LP, FP, PL separately controlled power domains
- Support for all boot modes (except NAND) and scenarios
- Support for any combination of PS connected peripherals
- Evenly spread supply pins for good signal integrity
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado Design Suite - HLx Edition Download
Vivado Design Suite HLx Editions include Partial Reconfiguration at no additional cost with the Vivado HL Design Edition and HL System Edition. In-warranty users can regenerate their licenses to gain access to this feature.
Übersicht aller Editionen der Vivado Design Suite
Xilinx Licensing FAQ
The Base Board: TEBF0808-04A
The Trenz Electronic TEBF0808 UltraITX+ base board has been developed individually for the TE0808 UltraSOM+ MPSoC.
Key Features
- Mini-ITX form factor, PC enclosure compatible
- ATX-24 power supply connector
- Optional 12V standard power plug
- Headers
- Intel 10-pin HDA Audio
- Intel 9-pin Power-/Reset-Button, Power-/HD-LED
- PC-BEEPER
- On-board Power- / Reset-Switches
- 2 x Configuration 4-bit DIP-switches
- 2 x Optional 4-wire PWM fan connectors
- PCIe Slot - one PCIe lane (16 lane connector)
- CAN FD Transceiver (10 Pin IDC connector and 6-pin header)
- 4 x On-board configuration EEPROMs (1x Microchip 24LC128-I/ST, 3x Microchip 24AA025E48T-I/OT)
- Dual SFP+ Connector (2x1 Cage)
- 1 x DisplayPort (single lane)
- 1 x SATA Connector
- 2 x USB3.0 A Connector (Superspeed Host Port (Highspeed at USB2.0))
- 1 x USB3.0 on-board connector with two ports
- FMC HPC Slot (FMC_VADJ max. VCCIO)
- FMC Fan
- Gigabit Ethernet RGMII PHY with RJ45 MagJack
- All carrier board peripherals' I²C interfaces muxed to MPSoC's I²C interface
- Quad programmable PLL clock generator SI5338A
- 2x SMA coaxial connectors for clock signals
- MicroSD- / MMC-Card Socket (bootable)
- 32 Gbit (4 GByte) on-board eMMC flash (8 banks a 4 Gbit)
- 2 x System Controller CPLDs Lattice MachXO2 1200 HC
- 1 x Samtec FireFly (4 GT lanes bidirectional)
- 1 x Samtec FireFly connector for reverse loopback
- 2 pre-assembled TE0790 JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for programming MPSoC and SC CPLDs
- 20-pin ARM JTAG Connector (PS JTAG0)
- 3 x Pmod connector (GPIO's and I²C interface to SC CPLDs and MPSoC module)
- On-board DC-DC PowerSoCs
PC Enclosure Accessible I/O
- PCIe
- FMC
- Dual SFP+
- RJ45 Gigabit Ethernet
- 2 x USB3 Host
- Displayport
- microSD
- Two LEDs
- CAN FD (using DB9 to IDC10 Cable)
Core V1 Mini-ITX Enclosure - Technical Features
- Dimensions: 260 x 276 x 316 mm (B x H x T)
- Material: Steel
- Colour: Black
- Drive Slots: 2 x 3,5 Zoll (intern, 3,5 Zoll) and 2 x 2,5 Zoll (intern, 2,5 Zoll)
- Expansion slots: 2
- I/O-Panel: 2 x USB 3.0 and 1 x Audio In/Out each
- Maximum graphic card lenght: 255 mm (inner enclosure)
- Maximum graphic card lenght: 285 mm (outer enclosure)
- Maximum CPU cooler height: 140 mm
- Maximum lenght power supply: 200 mm
Scope of Delivery - Starter Kit
- 1 x Core V1 Mini-ITX Enclosure- black with viewing window and removable sled walls
- 1 x Power supply Be quiet! BN142 System Power 7, 400 Watt, 12V, ATX 2.3 with fan
- 1 x TE0808-04-9BE21-A MPSoC module with ZU9
- 1 x TEBF0808-04A base board
- 1 x Heatsink MBH31001-15W/2.6
- 1 x TE0790-02 XMOD FTDI JTAG adapter (compatible with Xilinx-Tools), pre-assembled on the carrier board
- 1 x TE0790-02L XMOD FTDI JTAG adapter (independent from Xilinx-Tools), pre-assembled on the carrier board
- 1 x 8 GB Class 4 microSDHC card
- 1 x USB cable, Type A to Type B Mini, 2 meter length
- 2 x Phillips screws, M3 x 6, pan head, zinc coated
- 2 x Spacer bolts, M3, 10 mm
Additional Information
The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Related links to "TE0808-04-9BE21-AS Starter Kit"