상품상세정보
Xilinx Zynq UltraScale+ MPSoC FPGA Board
Support XILINX Vitis-AI DPU Support Gigabit Optical Communication
Satisfy Network Communication, High-Speed Data Exchange and Storage Industrial Control, Deep Learning, AI Intelligence, Cloud Computing, 4K Video Transmission Processing, and Aerospace Applications
·ARM CPU
Quad Core ARM Cortex™-A53 + Dual Core ARM Cortex™-R5
·GPU
Mali™-400 MP2 GPU
·6GB DDR4
PS 4GB DDR4、PL 2GB DDR4
·FLASH RAM
8GB eMMC FLASH、64MB QSPI FLASH
Techinal Support
Development Software Version. Vitis 2020.1 Linux Version. petalinux 5.4.0-xilinx-v2020.1 All Doucments Saved in Dropbox, after buy the board, email to get it.
Course_S0_Development Environment
01. Vitis Installation
02. Install virtual machine and Ubuntu system
03. Install Linux version of Vitis software on Ubuntu
04.Petalinux tool installation
05. NFS service software installation
06. QT Creator development environment
07. Linux Common Commands
Remark. Vitis 2020.1
Course_S1_FPGA Experiment Tutorial
01. Introduction to Ultrascale+ MPSoC
02. FPGA Board Hardware Introduction
03. Introduction to Verilog basic modules
04. PL's "Hello World" LED experiment
05. PLL Experiment Under Vivado
06. FPGA on-chip RAM read and write test experiment
07. FPGA on-chip ROM read and write test experiment
08. FPGA on-chip FIFO read and write test experiment
09. Key Experiment in Vivado
10. PWM Breathing Light Experiment
11. UART Experiment
12. RS485 Experiment
13. PL side DDR4 read and write test experiment
14. HDMI Output Experiment (AN9134 Module)
15. HDMI Character Display Experiment
16. 7-inch LCD Screen Display Experiment (AN970 Module)
17. GTX Transceiver Bit Error Rate Test IBERT Experiment
Course_S2_Vitis Application Tutorial
01. Experience ARM, bare metal output "Hello World"
02. PS RTC Interrupt Experiment
03. PS MIO Experiment
04. PS Side UART Read and Write Control
05. PS Side Use of CAN
06. PS Side Use of I2C
07. PS Side Use of Display Port
08. PS Side SD Card Read and Write
09. PS Side Use of Ethernet (LWIP)
10. PS Side Remote Update QSPI Flash by Ethernet
11. Use of System Monitor
12. PS Side Use of EMIO
13. PL Side Use of AXI GPIO
14. PL Side RS485 Test
15. PL Side Use of Ethernet
16. Custom IP experiment
17. Use of Dual Core AMP
18. Use of “Free RTOS” under ZYNQ S
19. PL Read and Write PS DDR Data
20. Realize PS and PL Data Interaction through BRAM
21. DMA Loop Test22. Use of DMA--DAC Waveform Generator (AN108)
23. Use of DMA--ADC Oscilloscope (AN108)
24. Use of DMA--ADC oscilloscope (AN9238)
25. Use of DMA--ADC Oscilloscope (AN706)
26. Use the Scatter/Gather DMA Based on ADC Module (AN108)
27. Use the Scatter/Gather DMA Based on DAC Module (AN9767)
28. AN5642 Binocular Camera Collection and Display
29. SD card read and write operation camera capture
30. Binocular camera Ethernet transmission
31. MIPI Acquisition and Display Based on AN5641 Module
32. Use of 7 inch LCD Module
33. 7-inch Touch Screen GUI and Touch Control
34. Ethernet Transmission--ADC Acquisition Based on AN108 Module
35. Ethernet Transmission--ADC Acquisition Based on AN9238 Module
36. Ethernet Transmission-- ADC Acquisition Based onA N706 Module
Course_S3_Linux Basic Tutorial
01. Customizing Linux with Petalinux
02. Program hello world
03. gpio Control LED
04. Add Boot Scripts and User Files
05. SD Card Root File System
06. QT and OPENCV Cross-Compilation Environment
07. Use Vitis to Develop Linux Programs
08. Vitis Accelerates Basic Platform Creation
09. NVMe SSD operation under Linux
Remark. Linux Version petalinux 5.4.0-xilinx-v2020.1
Course_S4_Linux Driver Tutorial
01. Character Device
02. A New Way of Writing Character Devices
03. Device Tree and of Function
04. pinctrl and gpio Subsystem
05. Concurrent Processing
06. gpio input
07. Timer
08. Interrupt
09. Blocking IO
10. Non-Blocking IO
11. Asynchronous IO
12. Platform
13. Platform and Device Tree
14. MISC device driver
15. Input Subsystem
16. pwm Drive
17. I2C Driver
18. USB Driver
19. SPI Drive
20. Uart Driver
21. Block Device Driver
22.NIC driver
23. DMA Driver
24. Multi-touch screen driver
25. LCD Drive
Course_S5_Linux Application Development Tutorial
01. Building a Minimalist Working Environment
02. Hello World with Remote Debugging
03. OpenCV Edge Detection
04. OpenCV+Qt Face Detection
05. GStreamer's Camera Display
06. Qt+DRM+Gstreamer Camera Display
07. Qt+GPU Camera Display
08. Linux Register Operation
Course_S6_HSL Tutorial Tutorial
01. Getting to Know Vitis HLS
02. Getting Started
03. HLS Interacts with CPU Registers
04. How to use the built-in Functions in the xfopencv Library
05. Image RGB to Grayscale Conversion
06. Image RGB to YCrCb
07. Image Morphological Filtering
08. Image overlay
09. Image Contrast Adjustment
10. Corner Detection
11. SOBEL operator realizes edge detection
12. Canny Operator Realizes Edge Detection
13. How to Implement opencv Simulation with vitis HLS
Course_Vitis-AI Basic
01. Docker Environment Construction
02. Vitis-AI Development Process
03. Neural Network Training based on Keras Framework
04. Debugging Tools
Product package
Development board
AN9767 package
AN706 package
AN9238 package
Video package
Deluxe Package
Development board
●
●
●
●
●
●
Downloader
●
●
●
●
●
●
AN9767
●
●
AN706
●
●
AN9238
●
●
MIPI camera
●
●
7-inch screen
●
●
Package supporting module, click to learn more
key Features
·Core Board SOM
*Core Board, Click to Buy >>
·FPGA Board
Product Parameters
Core Board Main Parameters
Core Board SOM
ACU15EG
FPGA Chip
XCZU15EG-2FFVB1156I
Chip CPU
4x ARM Cortex-A53, 1.333GHz，双核 Cortex™-R5, 533MHz
Chip GPU
Mali™-400 MP2
Core Board RAM
PS DDR4, 4GB, 64bit, 2400Mbps
PL DDR4, 2GB, 32bit, 2400Mbps
PS end High-Speed Connector
PCIe® Gen2 x4, 2x USB3.0, SATA 3.1,DisplayPort, 4x Tri-mode Gigabit Ether net
PS end General Connector
2xUSB 2.0, 2x SD/SDIO, 2x UART, 2x CAN 2.0B,2x I2C, 2x SPI, 4x 32b GPIO
PL GTH
12.5Gb/sx16
Chip Level
Industrial Grade
Chip Working Temperature
-40℃-85℃
Speed Grades
-2
Logic Cells
747K
CLB Flip-Flops
682K
Look Up Tables (LUTs)
341K
Global Clock
4
DSP Slices
3,528
MAX.DISTRIBU-TED RAM
11.3Mb
BLOCK RAM
26.2Mb
ULTRARAM
31.5Mb
EMMC FLASH
8GB
QSPI FLASH
64MB
HP I/O
96
HD I/O
66
Interface and Function
DDR4
PS DDR4, 4 Pieces of 1G DDR4, 4GB Total, 64bit, Data Speed 2400Mbps PL DDR4, 2 Pieces of 1G DDR4, 2GB Total, 32bit, Data Speed 2400Mbps
QSPI Flash
2 Pieces of 256 Mbit QSPI Flash, Used as FPGA User Data Storage
eMMC Flash
8GB, Used as Large-Capacity Storage System
DP Interface
Mini Display Port up to 4K@30Hz or 1080P@60Hz Output (ALINX customized DP to HDMI cable, need to buy Separately )
M.2 Interface
Used to Connect the M.2 SSD Solid State Drive (Need to Buy it Yourself)
MIPI Interface
Used to Connect ALINX MIPI Interface OV5640 Camera Module AN5641
SFP Interface x 2
Data Communication Receiving and Transmitting Speed up to 12.5Gb/s
USB 3.0 x 4
Used to Connect External USB Peripherals
USB Uart x 2
Used for Serial Communication with PC or External Devices
Gigabit Ethernet
Two 10/100/1000M Ethernet with RJ-45 Interfaces for Data Exchange
SATA Interface
2 SATA interfaces, Used to Connect Hard Disk to Store Data
Crystal Oscillator
33.333MHz Provide for the PS system 200MHz Provide DDR Reference Clock for the PL Logic
RS485 Bus Interface x2
Used for 485 communication Service
CAN Bus Interface x2
Used for CAN Communication Service
FMC Expansion Ports
Standard FMC HPC Expansion PortCan be Connect with Various XILINX or ALINX FMC Modules (HDMI Input/Output Module, Binocular Camera Module, Hight Speed AD Module).
JTAG
10-pin 0.1-inch Standard JTAG Port for Programs Debug and Download
40-Pin Expansion Ports
One 40-Pin Expansion Ports (0.1 inch Pitch), Can be Connect with Various ALINX Modules (Binocular Camera Module, TFT LCD Screen, Camera, AD/DA and Other Modules).
EEPROM
EEPROM 24LC04 with IIC Interface On-Board
Temperature Sensor
Sensor Chip LM75, Used to Detect the Ambient Temperature
SD Card Slot
1 Micro SD Card Slot, Support SD Mode and SPI Mode
Real Time Clock
RTC with a Battery Holder, The Battery Model is CR1220
LED
5 LEDs, 1 LED in the Core Board, 4 LEDs in the Carrier Board
KEYs
3 KEYs, 1 Reset KEY, 2 User KEYs
Power Supply Parameters
Voltage Input
+12 V DC
Current Input
Max. Current 3A
Package List
FPGA Board
1
DC Fan (Fixed on the Board)
1
Mini USB Cable
1
USB Downloader Cable
1 Set
12V Power Adapter
1
Transparent Protection Board
1
TF Card
1
Card Reader
1
Structure Size
Size Dimension
Core Board 3.15 inch x 2.36 inch, Carrier Board 7.09 inch x 5.31 inch
Number of Layers
16-Layer Core Board PCB, 8-Layer Carrier Board PCB Reserve independent power layer and GND layer
XILINX VITIS-AI DPU
AI recognition detection, depth computing learning
Intelligent identification and detection, image and video processing, security monitoring, machine vision, fire monitoring,
traffic safety, smart construction site, smart hotel, smart agriculture, Internet of Things
Vehicle Identification
Infrared Vehicle Identification
Pedestrian recognition
Indoor Person Recognition
Fire detection
Helmet detection
Concrete defect detection
PCB defect detection
Super Combination with Mali™-400 MP2 GPU, 64bit DDR4 RAM
Industiral Grade Chip Dual ARM Application Processor
Quad Core ARM Cortex-A53，1.333GHz；Dual Core Cortex™-R5， 533MHz；PS 4GB DDR4，64bit；PL 2GB DDR4，32bit
Rich extension interface
High-Speed Transmission
Intelligent Recognition, Image and Video Processing Security Monitoring, Machine Vision
Intelligent Recognition, Image and Video Processing Security Monitoring, Machine Vision Rich Interfaces in the Carrier board. Standard FMC HPC Interface, SFP Interface x 2, M.2 SSD Interface, DP Interface, MIPI Camera Interface, USB 3.0 x 4, Gigabit Ethernet x 2 USB Uart x 2, SD Card Slot, CAN Bus Interface x2, RS485 Bus Interface x2 Apply to AI Intelligence, Cloud Computing, Deep Learning Network Communication, High-Speed Data Transmission Video Image Processing and Industrial Control
SFP Optical Fiber Interface
SFP Transmission Communication
Receiving and Transmitting Speed up to 12.5Gb/s
Data Collection Display
Signal Data Acquisition System
AN9767/AN706 Module On-Board Demo
*The Signal Source Output Signal is Connected to the AN9767 Module, and the Waveform Signal is Displayed through the Oscilloscope
*The Signal Source Output Signal is Connected to the AN706 Module,Run the System to Draw the Waveform Data, and is Displayed to the Monitor through the HDMI Interface of the FPGA Development Board
Intelligent Identification, Medical Security Vehicle Digital, Industrial Control, Smart Grid
Video image Collection Demo Camera Acquisition System
MIPI Camera Module AN5641 On-Board Demo
The MIP Camera Module AN5641 for Video Capture and Displays it on the Monitor through the Mini DP Interface
배송안내
● 결제일로부터 1~3주 안에 배송됩니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
교환 및 반품안내
● 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.
● 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
환불안내
● 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.
● 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
AS안내
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
이미지 확대보기AXU15EGB
비밀번호 인증
글 작성시 설정한 비밀번호를 입력해 주세요.
장바구니 담기
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
찜 리스트 담기
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?
CS CENTER
02-6956-9010문의 및 요청 사항을 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시면 최대한 빨리 처리해 드리도록 하겠습니다.
BANK INFO
1005-702-341569우리은행
예금주 : 이니프로주식회사
