TE0808-04-9BE21-AS 이미지 확대 보기
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS

TE0808-04-9BE21-AS

공유
짧은설명
TE0808-04-9BE21-AS Starter Kit
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
143,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617706
제조사
Trenz Electronic

상품상세정보

Product information "TE0808-04-9BE21-AS Starter Kit"

The Trenz Electronic Starter Kit TE0808-04-9BE21-AS consists of a TE0808-04-9BE21-A module with ZU9 on a TEBF0808-04 base board including a pre-assembled heatsink, in a black Core V1 Mini-ITX Enclosure. Supplied with a Be Quiet! 400W power supply for the enclosure, two mounted XMOD FTDI JTAG Adapter, an 8 GB micro SD card, an USB cable, screws and bolts.

The Module: TE0808-04-9BE21-A

The Trenz Electronic TE0808-04-9BE21-A is a MPSoC module integrating a Xilinx Zynq UltraScale+, 4 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, 20 high speed serial transceivers, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections.

Key Features

  • Xilinx Zynq UltraScale+ XCZU9EG-1FFVC900E
  • ZU9EG 900 Pin Packages
  • 3 mm mounting holes for skyline heat spreader
  • Size: 52 x 76 mm
  • B2B Connectors: 4 x 160 pin
  • Rugged for shock and high vibration
  • 4 GByte 64-Bit DDR4 SDRAM
  • 128 MByte SPI Boot Flash (dual parallel)
  • User I/Os
    • 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks)
    • Serial transceivers: 4 x GTR + 16 x GTH
    • Transceiver clocks inputs and outputs
    • PLL clock generator inputs and outputs
  • Si5345 - 10 output PLL
  • All power supplies on board, single 3.3V Power required
    • 14 on-board DC/DC regulators and 13 LDOs
    • LP, FP, PL separately controlled power domains
  • Support for all boot modes (except NAND) and scenarios
  • Support for any combination of PS connected peripherals
  • Evenly spread supply pins for good signal integrity

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado Design Suite - HLx Edition Download

Vivado Design Suite HLx Editions include Partial Reconfiguration at no additional cost with the Vivado HL Design Edition and HL System Edition. In-warranty users can regenerate their licenses to gain access to this feature.

Übersicht aller Editionen der Vivado Design Suite

Xilinx Licensing FAQ

The Base Board: TEBF0808-04A

The Trenz Electronic TEBF0808 UltraITX+ base board has been developed individually for the TE0808 UltraSOM+ MPSoC.

Key Features

  • Mini-ITX form factor, PC enclosure compatible
  • ATX-24 power supply connector
  • Optional 12V standard power plug
  • Headers
    • Intel 10-pin HDA Audio
    • Intel 9-pin Power-/Reset-Button, Power-/HD-LED
    • PC-BEEPER
  • On-board Power- / Reset-Switches
  • 2 x Configuration 4-bit DIP-switches
  • 2 x Optional 4-wire PWM fan connectors
  • PCIe Slot - one PCIe lane (16 lane connector)
  • CAN FD Transceiver (10 Pin IDC connector and 6-pin header)
  • 4 x On-board configuration EEPROMs (1x Microchip 24LC128-I/ST, 3x  Microchip 24AA025E48T-I/OT)
  • Dual SFP+ Connector (2x1 Cage)
  • 1 x DisplayPort (single lane)
  • 1 x SATA Connector
  • 2 x USB3.0 A Connector (Superspeed Host Port (Highspeed at USB2.0))
  • 1 x USB3.0 on-board connector with two ports
  • FMC HPC Slot (FMC_VADJ max. VCCIO)
  • FMC Fan
  • Gigabit Ethernet RGMII PHY with RJ45 MagJack
  • All carrier board peripherals' I²C interfaces muxed to MPSoC's I²C interface
  • Quad programmable PLL clock generator SI5338A
  • 2x SMA coaxial connectors for clock signals
  • MicroSD- / MMC-Card Socket (bootable)
  • 32 Gbit (4 GByte) on-board eMMC flash (8 banks a 4 Gbit)
  • 2 x System Controller CPLDs Lattice MachXO2 1200 HC
  • 1 x Samtec FireFly (4 GT lanes bidirectional)
  • 1 x Samtec FireFly connector for reverse loopback
  • 2 pre-assembled TE0790 JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for programming MPSoC and SC CPLDs
  • 20-pin ARM JTAG Connector (PS JTAG0)
  • 3 x Pmod connector (GPIO's and I²C interface to SC CPLDs and MPSoC module)
  • On-board DC-DC PowerSoCs

PC Enclosure Accessible I/O

  • PCIe
  • FMC
  • Dual SFP+
  • RJ45 Gigabit Ethernet
  • 2 x USB3 Host
  • Displayport
  • microSD
  • Two LEDs
  • CAN FD (using DB9 to IDC10 Cable)

Core V1 Mini-ITX Enclosure - Technical Features

  • Dimensions: 260 x 276 x 316 mm (B x H x T)
  • Material: Steel
  • Colour: Black
  • Drive Slots: 2 x 3,5 Zoll (intern, 3,5 Zoll) and 2 x 2,5 Zoll (intern, 2,5 Zoll)
  • Expansion slots: 2
  • I/O-Panel: 2 x USB 3.0 and 1 x Audio In/Out each
  • Maximum graphic card lenght: 255 mm (inner enclosure)
  • Maximum graphic card lenght: 285 mm (outer enclosure)
  • Maximum CPU cooler height: 140 mm
  • Maximum lenght power supply: 200 mm

Scope of Delivery - Starter Kit

  • 1 x Core V1 Mini-ITX Enclosure- black with viewing window and removable sled walls
  • 1 x Power supply Be quiet! BN142 System Power 7, 400 Watt, 12V, ATX 2.3 with fan
  • 1 x TE0808-04-9BE21-A MPSoC module with ZU9
  • 1 x TEBF0808-04A base board
  • 1 x Heatsink MBH31001-15W/2.6
  • 1 x TE0790-02 XMOD FTDI JTAG adapter (compatible with Xilinx-Tools), pre-assembled on the carrier board
  • 1 x TE0790-02L XMOD FTDI JTAG adapter (independent from Xilinx-Tools), pre-assembled on the carrier board
  • 1 x 8 GB Class 4 microSDHC card
  • 1 x USB cable, Type A to Type B Mini, 2 meter length
  • 2 x Phillips screws, M3 x 6, pan head, zinc coated
  • 2 x Spacer bolts, M3, 10 mm

Additional Information

The online pictures of this product are not a legally binding offer, but are symbol pictures for illustration and presentation only.

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0808-04-9BE21-AS Starter Kit"

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기TE0808-04-9BE21-AS

TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
  • TE0808-04-9BE21-AS
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동