MYS-437X-100-C

HOME >

MYIR

MYS-437X-100-C

짧은설명: Rico Kit

판매가: 견적문의 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 44,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000617657

제조사: MYIR Tech

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

Overview

The Rico Board is an excellent high-performance Single Board Computer (SBC) using the newest TI’s AM437x Sitara ARM Cortex-A9 based solution. This new generation solution has an increase in performance, as well as extensive reuse from the ARM Cortex-A8 offerings. It features up to 1GHz of processing power, 3D graphics acceleration for rich graphical user interfaces, PRU-ICSS for industrial protocols, improved Vector Floating Point (VFP) unit and other peripherals and interfaces support like Quad-SPI, dual parallel cameras, two independent eight-channel ADCs, etc.

Rico Board - TI AM437x ARM Cortex-A9 Single Board Computer

The AM437x processor family has four different pin-to-pin compatible AM437x device variations: the Sitara AM4376, AM4377, AM4378 and AM4379. They only have differences in options whether they have offered 3D graphics accelerator and their PRU can support for the EtherCAT slave protocol. Users can make selections according to their requirements.

TI AM437x Devices

The Rico board is equipped with 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board. Additionally, it has rich peripherals including a Debug serial port, USB 2.0 Host and Device ports, a Gigabit Ethernet port, TF card slot, HDMI port, dual camera interfaces, LCD interface, etc. Two 2.54mm pitch 40-pin expansion connectors allow the availability of more I/Os for peripheral signals like two SPI, two I2C, two CAN, four UARTs, one MMC and eight-channel ADC.

The Rico Board is capable of running Linux operating system and provided with Linux 3.12.10 SDK of which the kernel and many drivers are in source code. MYIR also offer a complete Rico Board development kit that includes a Rico Board, necessary cable accessories, an optional 7-inch LCD Module (including capacitive touch screen), optional 3G, WiFi, Camera and GPRS modules, and detailed documents to enable rapid development when customers getting the board out-of-the-box.

The Rico Board can be used for the evaluation module (EVM) for the AM437x processor family; it can also be used directly for your embedded products. Typical applications are industrial automation, Programmable Logic Controllers (PLCs), bar code scanners, portable data terminals, test and measurement, patient monitoring and human machine interface (HMI).

The Rico Board has been selected as the Host Controller Board for TI' TIDA-00750 People Counting Demand Controlled Ventilation 3D Time-of-Flight (ToF) Reference Design due to its affordable cost, ready-to-use interfaces and Debian supporting.

TIDA-00750 People Counting for Demand Controlled Ventilation Using 3D Time-of-Flight (ToF) Reference Design Board Image

People Counting Demand Controlled Ventilation 3D Time-of-Flight Design Guide (Rev.A) (PDF 4942 KB)

Features

Item	Features
Processor	Up to 1GHz TI AM437x Sitara ARM Cortex-A9 32-Bit RISC processor - POWERVR SGX Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects - Single-cycle vector floating point (VFP) - Dual camera and display processing subsystem - Cryptographic acceleration and secure boot - PRU-ICSS enables simultaneous industrial Ethernet protocols and motor feedback protocols - Support for 32 bit LPDDR2/DDR3/DDR3L - Low power: ~5mW deep sleep and < 0.1mW RTC-only - Simplified power sequence for flexible power designs
Memory	512MB DDR3 SDRAM (2 x 256MB, 32-bit), compatible with 256MB/1GB DDR3 SDRAM
Storage	4GB eMMC 256/512MB Nand Flash (reserved) 16MB QSPI Flash 32KB EEPROM TF card interface
Communications	1 x Debug serial port 1 x 10/100/1000M Ethernet 1 x Mini USB 2.0 Device port 1 x USB Host 2.0 port
Display	1 x HDMI interface 1 x LCD interface
Input and Output	1 x 1.27mm pitch 20-pin JTAG interface (not soldered, on the back of the board) 2 x 30-pin Camera Interfaces 4 x Buttons (1x Reset, 2 x User, 1 x Power) 5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
Others	2 x 2.54mm pitch 40-pin female expansion connectors brought out peripherals below: - 2 x SPI - 2 x I2C - 2 x CAN - 4 x UARTs - 1 x MMC - 8 x ADC
Dimensions	65mm x 100mm x 1.6mm (8-layer PCB design)
Power supply	USB power supply or DC 5V/2A
PMIC	Power Management IC (TPS65218)
Working Temp.	0~70 Celsius
OS support	Linux 3.12.10

Rico Board Top-view

Rico Board Bottom-view

Hardware Features

The TI AM437x high-performance processors are based on the ARM Cortex-A9 core. Customers using this next generation solution will see an increase in performance, as well as extensive reuse from the ARM Cortex-A8 offerings.

Increasing performance and peripheral support
Sitara AM437x processors deliver the right balance of:
Performance
• Up to 1GHz of processing power
• 3D graphics accelerator
• On-chip quad-core PRU co-processor for real-time processing
• Improved vector floating-point unit
Interfaces
• LPDDR2/DDR3
• QSPI
• Display subsystem
Connectivity
• Two parallel camera ports
• Dual-port 1Gb Ethernet switch
• Two independent, eight-channel ADCs
• WiLink connectivity drivers
• Industrial protocols via PRU-ICSS

A. Use of TSC will limit available ADC0 inputs.

B. Max clock: LPDDR2 = 266 MHz; DDR3/DDR3L = 400 MHz

AM437x Function Block Diagram

Rico Board Function Block Diagram

Rico Board Dimension Chart

Software Features

Item	Features	Description
Boot program	SPL	First boot program (source code)
Boot program	u-boot	Secondary boot program (source code)
Linux Kernel	Linux 3.12.10	Customized kernel for Rico Board (source code)
Drivers	USB Host	USB Host driver (source code)
	USB Device	USB Device driver (source code)
	Ethernet	Gigabit Ethernet driver (source code)
	MMC/SD/TF	MMC/SD/TF card driver (source code)
	NandFlash	NandFlash driver (source code)
	eMMC	eMMC driver (source code)
	LCD Controller	LCD driver, can support 7-inch LCD Module (source code)
	Touch	Touch driver (source code)
	HDMI	HDMI driver (source code)
	Button	Button driver (source code)
	UART	UART driver (source code)
	LED	LED driver (source code)
	GPIO	GPIO driver (source code)
	RTC	RTC driver (source code)
	Watchdog	Watchdog driver (source code)
	Camera	Camera driver
File System	Buildroot	Provide tar package and ubi image file

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1	TI AM437x Datasheet	2.76 MB
2	TI AM437x Technical Reference Manual	19.8 MB
3	Rico Board Overview	840 KB
4	Rico Board Dimensions	107 KB
5	Rico Board Pinouts Description	866 KB
6	Rico Board Schematic	410 KB
7	Rico Board Quick Start Guide	1.28 MB