OVERVIEW

XCM-209 is an evaluation board equipped with a XILINX's high performance FPGA, Kintex-7 series (FFG900 package).
XCM-209 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact credit-card size board.
Only one 3.3V single power supply is needed. There are 296 user I/Os divided into four Vcco groups.

Vivado Design/System license is required to develop this board.
The free "WebPack" version does not support the FPGA device of this board.

Click to Zoom

Click to Zoom

BLOCK DIAGRAM

Click to Zoom

SPECIFICATIONS

• Xilinx Kintex-7
  - XC7K325T-1FFG900C
  - XC7K410T-1FFG900C

  Feature	XC7K325T	XC7K410T
  Logic Cells	326,080	406,720
  Slices	50,950	63,550
  Maximum Distributed RAM (kb)	4,000	5,663
  Maximum Block RAM (kb)	16,020	28,620
  DSP Slices	840	1,540
  CMT (MMCM x1 + PLL x1)	10	10
  Maximum user I/O pins (Device)	500	500
  Maximum user I/O pins (Board)	296	296

• User I/O : 296 (HIROSE connectors, 80 pin x2, 100 pin x2)
  - IOA (CNA Connector) : 64
    (Some of the IOA are connected HP bank with level conversion ICs.)
  - IOB (CNB Connector) : 64
  - IOC (CNC Connector) : 84
  - IOD (CND Connector) : 84
• Separated Vcco input for each connector
  - IOA : Fixed to 3.3V input from CNA Connector
  - IOB : External input from CNB Connector
  - IOC : External input from CNC Connector
  - IOD : External input from CND Connector
• DDR3 SDRAM
  Micron: MT41K64M16 (Micron, 1Gbit)
• Configuration Device
  Quad SPI ROM: N25Q128 or N25Q256 (Micron, 128/256Mbit)
• JTAG port (7 pin socket)
  - JTAG buffer for stable download and debug
• Power : 3.3V single supply
  - 1.0V/1.5 V/1.8 V/2.0 V on-board regulators
  - Sequenced power supplies (Power on)
• on board clocks
  - 50 MHz (LVTTL)
  - 200 MHz (LVDS)
• Power-on Reset IC for FPGA configuration
• User Switch : 2 (Push x1, DIP x1bit)
• User LED : 2
• Status LED : 2 (Power, Done)
• High quality ten layers PCB. (Immersion gold)
• Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

PACKAGE CONTENTS

Item	Image	Quantity
FPGA board (XCM-209-***)		1
Sockets (HIROSE 80P)		2
Sockets (HIROSE 100P)		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

DOCUMENTATION

• User's manual, Schematic , etc