상품상세정보
Product information ""ArduZynq" Arduino compatible AMD Zynq™ 7010 SoC-Modul"The predecessor of this article is TE0723-03M. All changes are in the Product Change Notification (PCN).
The Trenz Electronic TE0723-03-41C64-A is an Arduino shield compatible SoC module integrating a AMD/Xilinx Zynq™ 7010, 512 MByte DDR3L, and 16 MByte SPI Flash Memory for configuration and operation.
The "ArduZynq" is the lowest cost, Linux ready solution to use the latest FPGA: the AMD/Xilinx Zynq™ 7 series. Use it as a FPGA development platform, or run Linux on the Cortex A9 cores.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
The predecessor of this article is TE0723-03M. All changes are in the Product Change Notification (PCN).
The Trenz Electronic TE0723-03-41C64-A is an Arduino shield compatible SoC module integrating a AMD/Xilinx Zynq™ 7010, 512 MByte DDR3L, and 16 MByte SPI Flash Memory for configuration and operation.
The "ArduZynq" is the lowest cost, Linux ready solution to use the latest FPGA: the AMD/Xilinx Zynq™ 7 series. Use it as a FPGA development platform, or run Linux on the Cortex A9 cores.
All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.
Notice
Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.
Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored AMD/Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any AMD/Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.
Key Features
- AMD/Xilinx XC7Z010-1CLG225C
- Form Factor: Arduino Shield
- Dual ARM Cortex-A9
- 512 MByte DDR3L
- 16 MByte SPI Flash memory
- 12 MHz MEMS Oscillator low power consumption
- Hi-Speed USB 2.0 ULPI Transceiver
- 23 FPGA I/O's available on board-to-board connectors
- MicroSD Card socket
- Micro USB OTG
- RGB LED (PL I/O connected)
- "Done" LED (inverted polarity)
- On-board USB JTAG and UART
- CERN Open Hardware Licence 1.2
Other assembly options for cost or performance optimization plus high volume prices available on request.
- AMD/Xilinx XC7Z010-1CLG225C
- Form Factor: Arduino Shield
- Dual ARM Cortex-A9
- 512 MByte DDR3L
- 16 MByte SPI Flash memory
- 12 MHz MEMS Oscillator low power consumption
- Hi-Speed USB 2.0 ULPI Transceiver
- 23 FPGA I/O's available on board-to-board connectors
- MicroSD Card socket
- Micro USB OTG
- RGB LED (PL I/O connected)
- "Done" LED (inverted polarity)
- On-board USB JTAG and UART
- CERN Open Hardware Licence 1.2
Other assembly options for cost or performance optimization plus high volume prices available on request.
Recommended Software
Vivado ML Standard Edition (free version)
The Vivado ML Standard Edition is the FREE version of the Vivado design suite. Vivado ML Standard delivers instant access to some basic Vivado features and functionality at no cost.
Overview of all editions of Vivado ML
Vivado ML Standard Edition (free version)
The Vivado ML Standard Edition is the FREE version of the Vivado design suite. Vivado ML Standard delivers instant access to some basic Vivado features and functionality at no cost.
Overview of all editions of Vivado MLDevelopment Support
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Latest documentation, design support files and reference designs with source files are available for download free of charge.
Scope of Delivery
- 1 x TE0723-03-41C64-A "ArduZynq" module with AMD/Xilinx Zynq™ 7010
- 1 x TE0723-03-41C64-A "ArduZynq" module with AMD/Xilinx Zynq™ 7010
Additional Information
- Manufacturer's article number: TE0723-03-41C64-A
- Trenz Electronic TE0723 Wiki
- Hackaday Project "Arduino Compatible Zynq™ Shield"
- Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
Related links to ""ArduZynq" Arduino compatible AMD Zynq™ 7010 SoC-Modul"
- Manufacturer's article number: TE0723-03-41C64-A
- Trenz Electronic TE0723 Wiki
- Hackaday Project "Arduino Compatible Zynq™ Shield"
- Support Forum
All modules produced by Trenz Electronic are developed and manufactured in Germany.
배송안내
● 결제일로부터 1~3주 안에 배송됩니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
교환 및 반품안내
● 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.
● 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
환불안내
● 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.
● 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
AS안내
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
이미지 확대보기TE0723-03-41C64-A
비밀번호 인증
글 작성시 설정한 비밀번호를 입력해 주세요.
장바구니 담기
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
찜 리스트 담기
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?
CS CENTER
02-6956-9010문의 및 요청 사항을 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시면 최대한 빨리 처리해 드리도록 하겠습니다.
BANK INFO
1005-702-341569우리은행
예금주 : 이니프로주식회사
