Digilent
 Terasic Technologies
 Inipro
 Aerotenna
 Mango Communications
 Humandata
 Red Pitaya
 Trenz Electronic
 MYIR Tech
 Opal Kelly
 Xilinx
 Avnet
 Ironwood Electronics
 Bitalino
 Nepes Kocoafab
 Elecrow Technology
 Arduino
 Hitech Global
 Tokyo Electron Device
 Dynalith Systems
 Samtec
 Nutaq
 Olimex
 Boardcon
 Acute Technology
Verilog HDL Design
790,000
VHDL Design
790,000
Embedded System Design on Zynq
690,000
Embedded Linux on Zynq
990,000
Embedded System Design on Zynq
20,000
Verilog HDL Design using Vivado
12,000
Verilog HDL Design using Quartus
12,000
Verilog HDL Design using ISE
12,000
VHDL Design using Vivado
12,000
VHDL Design using Quartus
12,000
VHDL Design using ISE
12,000

<>
  ġ : HOME > Digilent > FPGA & Programmable Logic 

Arty
Artix-7 FPGA Development Board
        [ΰ]
(̴ ǸŰ Ե ݾԴϴ.)
  ǰ : IPG000617132
       : Digilent
 IP :
  :
  
  
Arty Pmod Pack
86,900

Arty is a ready-to-use development platform designed around the Artix-7 Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes the most flexible processing platform you could hope to add to your collection, capable of adapting to whatever your project requires. Unlike other Single Board Computers, Arty isn't bound to a single set of processing peripherals: One moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers. Additionally, with the universally popular expansion headers (Arduino R3 Headers and our Pmod headers), Arty will become the most adaptable tool in your project toolbox.

Support Materials

Datasheet (PDF) Schematics (PDF)

For all other material:

Resource Center


Features:

  • Xilinx Artix-35T FPGA:
    • 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops);
    • 1,800 Kbits of fast block RAM;
    • Five clock management tiles, each with a phase-locked loop (PLL);
    • 90 DSP slices;
    • Internal clock speeds exceeding 450MHz;
    • On-chip analog-to-digital converter (XADC).
    • Programmable over JTAG and Quad-SPI Flash
  • System Features:
    • 256MB DDR3L with a 16-bit bus @ 667MHz
    • 16MB Quad-SPI Flash
    • USB-JTAG Programming circuitry
    • Powered from USB or any 7V-15V source
  • System Connectivity:
    • 10/100 Mbps Ethernet
    • USB-UART Bridge
  • Interaction and Sensory Devices
    • 4 Switches
    • 4 Buttons
    • 1 Reset Button
    • 4 LEDs
    • 4 RGB LEDs
  • Expansion Connectors:
    • 4 Pmod connectors
    • Arduino/chipKIT Shield connector
  • Programming
    • Includes a free licence key of Vivado Design Suite.

What's
Included:

  • Arty Board Artix-7 FPGA
  • Digilent cardboard packaging with protective foam
  • Vivado Design Suite voucher


Welcome to the resource center for Arty!

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing Arty, visit the product page on our main website: digilentinc.com/arty.

Documentation

  • SchematicPDF
    • PDF Schematic of the PCB generated by Altium
  • Reference ManualWiki
    • Technical description of the Arty and all of its features. The Wiki page may contain more up-to-date information than the PDF.
  • Sell Sheet – Sell Sheet currently unavailable, please see the reference manual for product detail.

Design Resources

  • Vivado Board FilesWiki
    • Installing the 7 Series Vivado Board Files allows you to create Vivado projects that directly target the Arty hardware
  • Master XDCZIP
    • This file defines the pin constraints for every device on the Arty for Vivado designs.
  • Xilinx Memory Interface Generator (MIG) ProjectZIP
    • This package contains the files needed to properly configure a Xilinx MIG component so that it works with the onboard DDR3L.

Tutorials

  • Getting Started with MicroblazeWiki
    • Follow this introduction on how to get started with Microblaze using Vivado IP Integrator.
  • Getting Started with Microblaze ServersWiki
    • A more advanced Microblaze tutorial, this guide demonstrates how to run an echo server on Arty.
  • Arty Programming GuideWiki
    • This guide walks through the different methods available for programming the FPGA on the Arty

Reference Projects

  • General I/O DemoWiki
    • Basic demo that uses the onboard switches, buttons, leds, and UART
  • XADC DemoWiki
    • Basic demo that shows a simple implementation with the Artix-7 XADC
  • Microblaze Base System DesignWikiFIXME
    • This Vivado IP Integrator project implements a Microblaze system with cores that communicate with all of the peripherals on the Arty
  • Arty Out-of-Box DesignFIXME
    • The source code for the design that ships loaded into Arty's Quad-SPI Flash





 ݾ 90,000 ̸̻ ۵˴ϴ.

  ִ ǰ ֹ Ϸ 3 ȿ ۵˴ϴ.

 Ϲ ǰ ֹ Ϸ 5~10 ȿ ۵˴ϴ.
ǰ ǻ Ʒ ó ֽñ ٶϴ.

 ֹ ǰ ȯұ Ʒ ϴ.
  • ܼ ɿ ֹҴ Ұմϴ.
  • ǰÿ ǰ ǰ ¿  ǸŰ 쿡 ǰ մϴ.
  • ǰ ǰ ¿ ־ ǸŰ Ұ ¿ ߰ ߻ ֽϴ.
  • ǰ Ϸκ ǰϱ Ⱓ ȯұݾ Ʒ ϴ.
    • ֹ : ȯұݾ = ǰ - ؿܿ۷
    • 7̳ : ȯұݾ = ǰ - ؿܿ۷ - ޼ ( 5,000 )
    • 7 ~ 30 : ȯұݾ = ǰ - ǰ10% - ؿܿ۷ - ޼ ( 5,000 )
    • 30 ~ 60 : ȯұݾ = ǰ - ǰ30% - ؿܿ۷ - ޼ ( 5,000 )
    • 60 ~ 90 : ȯұݾ = ǰ - ǰ50% - ؿܿ۷ - ޼ ( 5,000 )
    • 90 ~ 120 : ȯұݾ = ǰ - ǰ70% - ؿܿ۷ - ޼ ( 5,000 )
    • 120 ~ 150 : ȯұݾ = ǰ - ǰ90% - ؿܿ۷ - ޼ ( 5,000 )
 TEL : 02-2047-1047 , E-Mail : webmaster@inipro.net



 ̴ο ̴ ī ϰ ֽϴ.

 ̴ ī Ͻô ñ ٶϴ.

ŬϽø ̴Ͻý ý ȿ ȮϽ  ֽϴ. ̴δ ŷȸ ǥؾ ؼմϴ.
ǸžŰȣ : 2013--1146ȣ , ȣ : ȫ̿
ȣ : ̴ ֽȸ , ڵϹȣ : 215-87-84980 , ǥ : 쿵
Tel : 02-2047-1046~7 , Fax : 02-2047-1049 , E-Mail : webmaster@inipro.net
ּ : Ư ı η 52 ̺ B 507ȣ

Copyright Inipro Inc. All Rights Reserved Since 2007