Digilent
 Terasic Technologies
 Inipro
 Aerotenna
 Mango Communications
 Humandata
 Red Pitaya
 Trenz Electronic
 MYIR Tech
 Opal Kelly
 Xilinx
 Avnet
 Ironwood Electronics
 Bitalino
 Nepes Kocoafab
 Elecrow Technology
 Arduino
 Hitech Global
 Tokyo Electron Device
 Dynalith Systems
 Samtec
 Nutaq
 Acute Technology
Verilog HDL Design using Vivado
790,000
Verilog HDL Design using Quartus
790,000
VHDL Design using Vivado
790,000
VHDL Design using Quartus
790,000
Verilog HDL Design
790,000
Embedded System Design on Zynq
690,000
Embedded Linux on Zynq
990,000

3,000,000
  ġ : HOME > Digilent > FPGA & Programmable Logic 

NetFPGA-1G-CML
Kintex-7 FPGA Development Board
        [ΰ]
(̴ ǸŰ Ե ݾԴϴ.)
  ǰ : IPG000615055
       : Digilent
 IP :
 ó :
  :
  

The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx Kintex-7 XC7K325T-1FFG676 FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high-speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications. The FMC connector can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.

Support Materials

Datasheet (PDF) Schematics (PDF)

For all other material:

Resource Center

Note:

The NetFPGA-1G-CML is designed to support the Stanford NetFPGA architecture with reference designs available through the NetFPGA GitHub Organization (http://www.github.com/cmlab/netfpga-1g-cml/wiki). It is fully compatible with Xilinx Vivado and ISE Design Suites as well as the Xilinx SDK for embedded software design.

For reference projects, design resources, and the most up-to-date documentation, please visit the NetFPGA-1G-CML Resource Center.

Stats:

Processor/IC: Xilinx Kintex-7 XC7K325T-1FFG676 FPGA

Features:

  • Xilinx Kintex-7 XC7K325T-1FFG676 FPGA
  • X4 Gen 2 PCI Express
  • 1-Gbit BPI Flash
  • SD card slot
  • Real time clock
  • Crypto-authentication chip
  • Can be powered inside or outside a PC using a standard ATX power supply with PCIe 6 pin or 6pin+2 connector. Please refer to reference manual for more detail
  • X16 4.5 MB QDRII+ static RAM (450 MHz)
  • X8 512 MB DDR3 dynamic RAM (800 MHz)
  • Low-jitter 200 MHz oscillator
  • Four 10/100/1000 Ethernet PHYs with RGMII
  • 32-bit PIC microcontroller
  • USB microcontroller
  • Four on-board LEDs and four onboard general-purpose buttons
  • High pin count FMC connector (VITA 57) with 100 Select-IO and 4 GTX serial pairs
  • Two Pmod connectors

What's
Included:



Welcome to the resource center for the NetFPGA-1G-CML!

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the NetFPGA-1G-CML, visit the product page on our main website: NetFPGA-1G-CML

The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx Kintex-7 XC7K325T FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications. The FMC connector can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.


Documentation

  • SchematicPDF
    • PDF Schematic of the PCB generated by Altium
  • Reference ManualWiki Page PDF
    • Technical description of the NetFPGA-1G-CML and all of its features. The Wiki may contain more up-to-date information than the PDF.
  • Sell Sheet – Sell Sheet is currently unavailable, please see the reference manual for product detail





 ݾ 90,000 ̸̻ ۵˴ϴ.

  ִ ǰ ֹ Ϸ 3 ȿ ۵˴ϴ.

 Ϲ ǰ ֹ Ϸ 5~10 ȿ ۵˴ϴ.
ǰ ǻ Ʒ ó ֽñ ٶϴ.

 ֹ ǰ ȯұ Ʒ ϴ.
  • ܼ ɿ ֹҴ Ұմϴ.
  • ǰÿ ǰ ǰ ¿  ǸŰ 쿡 ǰ մϴ.
  • ǰ ǰ ¿ ־ ǸŰ Ұ ¿ ߰ ߻ ֽϴ.
  • ǰ Ϸκ ǰϱ Ⱓ ȯұݾ Ʒ ϴ.
    • ֹ : ȯұݾ = ǰ - ؿܿ۷
    • 7̳ : ȯұݾ = ǰ - ؿܿ۷ - ޼ ( 5,000 )
    • 7 ~ 30 : ȯұݾ = ǰ - ǰ10% - ؿܿ۷ - ޼ ( 5,000 )
    • 30 ~ 60 : ȯұݾ = ǰ - ǰ30% - ؿܿ۷ - ޼ ( 5,000 )
    • 60 ~ 90 : ȯұݾ = ǰ - ǰ50% - ؿܿ۷ - ޼ ( 5,000 )
    • 90 ~ 120 : ȯұݾ = ǰ - ǰ70% - ؿܿ۷ - ޼ ( 5,000 )
    • 120 ~ 150 : ȯұݾ = ǰ - ǰ90% - ؿܿ۷ - ޼ ( 5,000 )
 TEL : 02-2047-1047 , E-Mail : webmaster@inipro.net



 ̴ο ̴ ī ϰ ֽϴ.

 ̴ ī Ͻô ñ ٶϴ.

ŬϽø ̴Ͻý ý ȿ ȮϽ  ֽϴ. ̴δ ŷȸ ǥؾ ؼմϴ.
ǸžŰȣ : 2013--1146ȣ , ȣ : ȫ̿
ȣ : ̴ ֽȸ , ڵϹȣ : 215-87-84980 , ǥ : 쿵
Tel : 02-2047-1046~7 , Fax : 02-2047-1049 , E-Mail : webmaster@inipro.net
ּ : Ư ı η 52 ̺ B 507ȣ

Copyright Inipro Inc. All Rights Reserved Since 2007